Journal of biomechanical engineering.
Publisher:
American Society of Mechanical Engineers.. New York Ny : American Society Of Mechanical Engineers
Frequency: Bimonthly, 1998-
Country: United States
Language: English
Author(s):
American Society of Mechanical Engineers.
Start Year:1977 -
ISSN:
0148-0731 (Print)
1528-8951 (Electronic)
0148-0731 (Linking)
1528-8951 (Electronic)
0148-0731 (Linking)
Impact Factor
1.7
| NLM ID: | 7909584 |
| (DNLM): | J14590000(s) |
| (OCoLC): | 02833687 |
| Coden: | JBENDY |
| Classification: | W1 JO564L |
Elastic Modulus and Its Relation to Apparent Mineral Density in Juvenile Equine Bones of the Lower Limb. Density-modulus relationships are necessary to develop finite element models of bones that may be used to evaluate local tissue response to different physical activities. It is unknown if juvenile equine trabecular bone may be described by the same density-modulus as adult equine bone, and how the density-modulus relationship varies with anatomical location and loading direction. To answer these questions, trabecular bone cores from the third metacarpal (MC3) and proximal phalanx (P1) bones of juvenile horses (age <1 yr) were machined in the longitudinal (n = 134) and transverse (n ...
Impact of Size and Shape of Equine Femoral Subchondral Bone Cysts With a Transcondylar Screw on Predicted Bone Formation Area in a Finite Element Model. Equine subchondral bone cysts (SBCs) develop most often in the medial femoral condyle (MFC) of yearlings intended for performance. SBCs often cause lameness and can cause secondary injuries to the meniscus and tibial cartilage. A novel surgical technique using a transcondylar lag screw (TLS) across an MFC SBC has shown success in lameness resolution and radiographic healing of MFC SBC. In a previous study using finite element analysis, our lab showed that a TLS stimulated bone formation on the inner surface of the SBC and altered third principal stress vectors to change the direction of surfac...
Could a Compliant Foam Anvil Characterize the Biofidelic Impact Response of Equestrian Helmets? The performance of equestrian helmets to protect against brain injuries caused by fall impacts against compliant surfaces such as turf has not been studied widely. We characterize the kinematic response of simulated fall impacts to turf through field tests on horse racetracks and laboratory experiments. The kinematic response characteristics and ground stiffness at different going ratings (GRs) (standard measurement of racetrack condition) were obtained from 1 m and 2 m drop tests of an instrumented hemispherical impactor onto a turf racetrack. The "Hard" rating resulted in higher peak lin...
Comparison Between the Hyperelastic Behavior of Fresh and Frozen Equine Articular Cartilage in Various Joints. Fresh and frozen cartilage samples of the fetlock, carpus, and stifle were collected from 12 deceased horses. Half were measured immediately following extraction, and half were frozen for seven days and then measured. Seven indentations (various normalized displacements) were implemented with an indention rate of 0.1 mm/s. Solid phase aggregate modulus (Es), hyperelastic material constant (α), and fluid load fraction (F') of equine articular cartilage were assessed using the Ogden hyperelastic model. The properties were statistically compared in various joints (fetlock, carpus, and stifle),...
A surface roughness comparison of cartilage in different types of synovial joints. The naturally occurring structure of articular cartilage has proven to be an effective means for the facilitation of motion and load support in equine and other animal joints. For this reason, cartilage has been extensively studied for many years. Although the roughness of cartilage has been determined from atomic force microscopy (AFM) and other methods in multiple studies, a comparison of roughness to joint function has not be completed. It is hypothesized that various joint types with different motions and regimes of lubrication have altered demands on the articular surface that may affect ...
A linear laser scanner to measure cross-sectional shape and area of biological specimens during mechanical testing. Measure of the cross-sectional area (CSA) of biological specimens is a primary concern for many biomechanical tests. Different procedures are presented in literature but besides the fact that noncontact techniques are required during mechanical testing, most of these procedures lack accuracy or speed. Moreover, they often require a precise positioning of the specimen, which is not always feasible, and do not enable the measure of the same section during tension. The objective of this study was to design a noncontact, fast, and accurate device capable of acquiring CSA of specimens mounted on a ...
Cartilage collagen matrix reorientation and displacement in response to surface loading. An investigation of collagen fiber reorientation, as well as fluid and matrix movement of equine articular cartilage and subchondral bone under compressive mechanical loads, was undertaken using small angle X-ray scattering measurements and optical microscopy. Small angle X-ray scattering measurements were made on healthy and diseased samples of equine articular cartilage and subchondral bone mounted in a mechanical testing apparatus on station ID18F of ESRF, Grenoble, together with fiber orientation analysis using polarized light and displacement measurements of the cartilage matrix and fluid...
A musculoskeletal model of the equine forelimb for determining surface stresses and strains in the humerus-part II. Experimental testing and model validation. The first objective of this study was to experimentally determine surface bone strain magnitudes and directions at the donor site for bone grafts, the site predisposed to stress fracture, the medial and cranial aspects of the transverse cross section corresponding to the stress fracture site, and the middle of the diaphysis of the humerus of a simplified in vitro laboratory preparation. The second objective was to determine whether computing strains solely in the direction of the longitudinal axis of the humerus in the mathematical model was inherently limited by comparing the strains measured...
A musculoskeletal model of the equine forelimb for determining surface stresses and strains in the humerus–part I. Mathematical modeling. Knowledge of the forces that act upon the equine humerus while the horse is standing and the resulting strains experienced by the bone is useful for the prevention and treatment of fractures and for assessing the proximolateral aspect of the bone as a site for obtaining autogenous bone graft material. The first objective was to develop a mathematical model to predict the loads on the proximal half of the humerus created by the surrounding musculature and ground reaction forces while the horse is standing. The second objective was to calculate surface bone stresses and strains at three cross se...
Simulation of turbulent airflow using a CT based upper airway model of a racehorse. Computational model for airflow through the upper airway of a horse was developed. Previous flow models for human airway do not hold true for horses due to significant differences in anatomy and the high Reynolds number of flow in the equine airway. Moreover, models that simulate the entire respiratory cycle and emphasize on pressures inside the airway in relation to various anatomical diseases are lacking. The geometry of the airway was created by reconstructing images obtained from computed tomography scans of a thoroughbred racehorse. Different geometries for inhalation and exhalation were ...
Tracking the motion of hidden segments using kinematic constraints and Kalman filtering. Motion capture for biomechanical applications involves in almost all cases sensors or markers that are applied to the skin of the body segments of interest. This paper deals with the problem of estimating the movement of connected skeletal segments from 3D position data of markers attached to the skin. The use of kinematic constraints has been shown previously to reduce the error in estimated segment movement that are due to skin and muscles moving with respect to the underlying segment. A kinematic constraint reduces the number of degrees of freedom between two articulating segments. Moreover...
Membrane transport properties of equine and macaque ovarian tissues frozen in mixtures of dimethylsulfoxide and ethylene glycol. The rate at which equine and macaque ovarian tissue sections are first cooled from +25 degrees C to +4 degrees C has a significant effect on the measured water transport when the tissues are subsequently frozen in 0.85 M solutions of glycerol, dimethylsulfoxide (DMSO), or ethylene glycol (EG). To determine whether the response of ovarian tissues is altered if they are suspended in mixtures of cryoprotective agents (CPAs), rather than in solutions of a single CPA, we have now measured the subzero water transport from ovarian tissues that were suspended in mixtures of DMSO and EG. Sections of fr...
Determining effective centroid position in biomechanical testing: a technique for simplifying whole bone analysis. Whole bone in vitro biomechanical compressive testing can be complicated by three factors: sample asymmetry, heterogeneous material properties, and unknown effective centroid location. Methods: The technique presented here facilitates the calculation of effective centroid position, modulus of elasticity and equivalent uniform strain magnitude for a cross section of bone from a simple whole bone compressive test. Simplification of section response to load is achieved through a combination of linear beam and simple planer geometry theory. The technique requires three longitudinal strain gauges b...
Musculoskeletal modeling and dynamic simulation of the thoroughbred equine forelimb during stance phase of the gallop. Because thoroughbred racehorses have a high incidence of forelimb musculoskeletal injuries, a model was desired to screen potential risk factors for injuries. This paper describes the development of a musculoskeletal model of the thoroughbred forelimb and a dynamic simulation of the motion of the distal segments during the stance phase of high-speed (18 m/s) gallop. The musculoskeletal model is comprised of segment, joint, muscle-tendon, and ligament information. The dynamic simulation incorporates a proximal forward-driving force, a distal ground reaction force model, muscle activations, and ...
Energy comparison between trot, bound, and gallop using a simple model. In this paper, the dynamics of quadruped trot, gallop, and bound will be examined using a simple model for the quadruped. The body of the quadruped is modeled as a uniform bar and the legs are modeled by massless springs. It will be shown that symmetry can be used to study the locomotion of this system. Using symmetry, a technique will be developed to obtain periodic solutions for each of the gaits of the quadruped model. These periodic solutions will be computed at various speeds. The energy levels will be compared for each of the gaits. The exchange of energy between its different forms will...