Omneity® Pellets
All-In-One Vitamin & Mineral Pellet
Topic:Biomechanics
Biomechanics in horses refers to the study of the mechanical principles that govern movement and physical function in equine species. This field encompasses the analysis of gait, locomotion, and the forces exerted by and upon the horse's musculoskeletal system. Biomechanical studies often involve the use of motion capture technology, force plates, and computer modeling to assess how horses move and how various factors, such as conformation, training, and health status, influence their performance and soundness. Research in equine biomechanics contributes to understanding injury prevention, rehabilitation, and performance optimization. This page compiles peer-reviewed research studies and scholarly articles that explore the mechanics of movement, the impact of external and internal forces, and the applications of biomechanical analysis in equine care and management.
In vitro comparison of two centrally threaded, positive-profile transfixation pin designs for use in third metacarpal bones in horses. To compare heat generation during insertion, pullout strength, and associated microdamage between a self-tapping positive profile transfixation pin (STTP) and nontapping positive profile transfixation pin (NTTP). Methods: 30 pairs of third metacarpal bones (MC3s) from adult equine cadavers. Methods: One MC3 of each pair was assigned to the STTP group; the other was assigned to the NTTP group. The assigned pin was inserted into the diaphysis in a lateral to medial direction. Bone temperature increase during pilot-hole drilling and pin insertion was recorded at 1 mm from the final thread positio...
Finite element modelling of equestrian helmet impacts exposes the need to address rotational kinematics in future helmet designs. Jockey head injuries, especially concussions, are common in horse racing. Current helmets do help to reduce the severity and incidences of head injury, but the high concussion incidence rates suggest that there may be scope to improve the performance of equestrian helmets. Finite element simulations in ABAQUS/Explicit were used to model a realistic helmet model during standard helmeted rigid headform impacts and helmeted head model University College Dublin Brain Trauma Model (UCDBTM) impacts. Current helmet standards for impact determine helmet performance based solely on linear acceleration....
The effect of cooling on the contractility of equine digital small lamellar arteries: modulating role of the endothelium. The equine hoof displays thermoregulatory functions, and the blood vessels lying under the hoof wall are temperature sensitive. The aim of this study was to investigate the effect of cooling on the contractile responses to α-adrenoceptor and 5-HT receptor stimulation in equine small lamellar arteries using wire myography. The role of the endothelium in the response mediated by 5-HT was also evaluated. Moderate cooling caused a reduction of the contraction induced by depolarizing Krebs solution (DKS, containing 118 mm KCl) and the maximal contraction caused by UK-14304 (α(2)-adrenoceptor agon...
The propagation of induced tendon lesions in the equine superficial digital flexor tendon: an ex vivo study. Clinical tendon lesions usually enlarge during the first days to weeks after sustaining the injury due to enzymatic and biomechanical influences. Limiting this enlargement would positively influence prognosis related to lesion size. Objective: To investigate the effect of cyclic loading on the propagation of enzymatically and physically induced tendon lesions and to assess the effect of immobilisation thereon in an ex vivo model. Methods: Equine cadaver limbs with either physically or collagenase-induced SDFT lesions were placed in a pneumatic loading device. Groups consisted of unloaded limbs...
Lateralised motor behaviour leads to increased unevenness in front feet and asymmetry in athletic performance in young mature Warmblood horses. Foot stance in grazing significantly influences hoof conformation and development from foal to yearling age. Objective: To conduct a longitudinal study to establish if the relationship between motor laterality and uneven front feet persisted in 3-year-old horses at the time of studbook selection and to investigate if such laterality and unevenness might influence the horses' ability to perform symmetrically while trotting, cantering and free jumping. Methods: Seventeen clinically sound but untrained (with only minimal experience of handling) and sound Warmblood horses that had participated in ...
Length and elasticity of side reins affect rein tension at trot. This study investigated the horse's contribution to tension in the reins. The experimental hypotheses were that tension in side reins (1) increases biphasically in each trot stride, (2) changes inversely with rein length, and (3) changes with elasticity of the reins. Eight riding horses trotted in hand at consistent speed in a straight line wearing a bit and bridle and three types of side reins (inelastic, stiff elastic, compliant elastic) were evaluated in random order at long, neutral, and short lengths. Strain gauge transducers (240 Hz) measured minimal, maximal and mean rein tension, rate ...
Novel keratins identified by quantitative proteomic analysis as the major cytoskeletal proteins of equine (Equus caballus) hoof lamellar tissue. The dermo-epidermal interface that connects the equine distal phalanx to the cornified hoof wall withstands great biomechanical demands, but is also a region where structural failure often ensues as a result of laminitis. The cytoskeleton in this region maintains cell structure and facilitates intercellular adhesion, making it likely to be involved in laminitis pathogenesis, although it is poorly characterized in the equine hoof lamellae. The objective of the present study was to identify and quantify the cytoskeletal proteins present in the epidermal and dermal lamellae of the equine hoof by ...
In vitro mechanical evaluation of a novel pin-sleeve system for external fixation of distal limb fractures in horses: a proof of concept study. To evaluate the efficacy of a novel pin-sleeve cast (PSC) system for external fixation of distal limb fractures in horses and to compare it with the transfixation pin cast (TPC) system. Methods: Experimental. Methods: One bone substitute each was used for the TPC and PSC systems. The PSC was tested in 4 configurations characterized by different pin preloads. Methods: Specimens were loaded in axial compression in the elastic range. Variables compared statistically were: bone substitute axial displacement and axial strain measured above implants with strain gauges. Pin preload was correlated wit...
Effect of temperature on race times on a synthetic surface. Differences in racing times have been noted on synthetic track surfaces that appear to depend on the temperature of the track. No published study to date has considered this effect in a systematic manner. Objective: To investigate the relationship between temperature of track and speed of horses racing on a synthetic surface. Potential changes in the wax component of the synthetic track were investigated as one possible cause of changes in the track speed at the temperatures observed. Methods: At Del Mar racetrack (California, USA), the air, surface and subsurface temperatures at 4 depths in t...
Kinematics of saddle and rider in high-level dressage horses performing collected walk on a treadmill. The kinematics of the saddle and rider have not been thoroughly described at the walk. Objective: To describe saddle and rider movements during collected walk in a group of high-level dressage horses and riders. Methods: Seven high-level dressage horses and riders were subjected to kinematic measurements while performing collected walk on a treadmill. Movements of the saddle and rider's pelvis, upper body and head were analysed in a rigid body model. Projection angles were determined for the rider's arms and legs, and the neck and trunk of the horse. Distances between selected markers were use...
Combined nanoindentation testing and scanning electron microscopy of bone and articular calcified cartilage in an equine fracture predilection site. Condylar fracture of the third metacarpal bone (Mc3) is the commonest cause of racetrack fatality in Thoroughbred horses. Linear defects involving hyaline articular cartilage, articular calcified cartilage (ACC) and subchondral bone (SCB) have been associated with the fracture initiation site, which lies in the sagittal grooves of the Mc3 condyle. We discovered areas of thickened and abnormally-mineralised ACC in the sagittal grooves of several normal 18-month-old horses, at the same site that linear defects and condylar fracture occur in older Thoroughbreds and questioned whether this tissue ...
Symmetry indices based on accelerometric data in trotting horses. Detection and quantification of lameness in horses consists primarily of a subjective assessment, whereby both intra- and inter-observer disagreements exist, especially with low grade lameness. Therefore, clinically applicable methods are needed for reliable, objective assessments. The aim of this study was to describe three symmetry indices derived from a simple accelerometric method and investigate these in sound trotting horses. The indices describe the overall symmetry of the gait, the symmetry of loads placed on the limbs and the symmetry in timing between left and right steps. These symm...
Hindlimb response to tactile stimulation of the pastern and coronet. Lightweight tactile stimulators attached to the hind pasterns increase the height of the hind hoof flight arc but details of the induced changes in swing phase kinematics and kinetics have not been investigated. Objective: Stimulators on the hind pasterns are associated with increased hindlimb joint flexions and increased positive work performed by the hip and tarsal musculature. Methods: Nine nonlame horses trotted 4 times with and without 55 g tactile stimulators loosely attached around the hind pasterns. Height of the flight arc and peak flexion angles of the hindlimb joints were measured a...
In vitro biomechanical comparison of a modified 5.5 mm locking compression plate fixation with a 5.5 mm locking compression plate fixation of osteotomized equine third metacarpal bones. To compare number of cycles to failure for palmarodorsal 4-point bending of a modified 5.5 mm broad locking compression plate (M5.5-LCP) fixation with a 5.5 mm broad LCP (5.5-LCP) fixation used to repair osteotomized equine third metacarpal (MC3) bones. Methods: In vitro biomechanical testing. Methods: Adult equine cadaveric MC3 bones (n=6 pairs). Methods: An 8-hole, M5.5-LCP, obtained by having a 1.0 mm thickness removed from the bone contact portion of the 5.5-LCP, was applied to the dorsal surface of 1 randomly selected MC3 from each pair, and an 8-hole, 5.5-LCP was applied dorsally to the ...
A comparison of the moment arms of pelvic limb muscles in horses bred for acceleration (Quarter Horse) and endurance (Arab). Selective breeding for performance has resulted in distinct breeds of horse, such as the Quarter Horse (bred for acceleration) and the Arab (bred for endurance). Rapid acceleration, seen during Quarter Horse racing, requires fast powerful muscular contraction and the generation of large joint torques, particularly by the hind limb muscles. This study compared hind limb moment arm lengths in the Quarter Horse and Arab. We hypothesized that Quarter Horse hind limb extensor muscles would have longer moment arms when compared to the Arab, conferring a greater potential for torque generation at the...
In vitro comparison of a novel external fixator and traditional full-limb transfixation pin cast in horses. To compare the mechanical properties and failure modes of a standardized short oblique distal radial metaphyseal osteotomy stabilized using either a transfixation pin cast (TPC), a modular-sidebar external skeletal fixator (ESF), or a solid-sidebar ESF (modular- or solid-ESF, respectively) using static or cyclic axial loading to failure. Methods: In vitro study. Methods: Equine cadaver forelimbs. Methods: A 30 degrees oblique distal radial osteotomy was created and stabilized using 1 of the 3 fixation methods: (1) TPC, (2) modular-ESF, or (3) solid-ESF. Limbs were tested using static (TPC, mod...
An in vitro biomechanical comparison of a 5.5 mm locking compression plate fixation with a 4.5 mm locking compression plate fixation of osteotomized equine third metacarpal bones. To compare the monotonic biomechanical properties and fatigue life of a 5.5-mm-broad locking compression plate (5.5 LCP) fixation with a 4.5-mm-broad locking compression plate (4.5 LCP) fixation to repair osteotomized equine 3rd metacarpal (MC3) bones. Methods: In vitro biomechanical testing of paired cadaveric equine MC3 with a middiaphyseal osteotomy, stabilized by 1 of 2 methods for fracture fixation. Methods: Fifteen pairs of adult equine cadaveric MC3 bones. Methods: Fifteen pairs of equine MC3 were divided into 3 test groups (5 pairs each) for (1) 4-point bending single cycle to failure ...
Evaluation of the effects of transendoscopic diode laser palatoplasty on clinical, histologic, magnetic resonance imaging, and biomechanical findings in horses. To determine the effects of diode laser palatoplasty on the soft palate in horses. Methods: 6 clinically normal horses and 6 euthanized horses from another study. Methods: 6 horses underwent diode laser palatoplasty (treated horses); 3 received low-dose laser treatment (1,209 to 1,224 J), and 3 received high-dose treatment (2,302 to 2,420 J). Six other horses received no treatment (control horses). The upper respiratory tracts of all treated horses were evaluated immediately following surgery (day 0) and on days 2, 7, 14, 21, 30, and 45. Horses were euthanized on day 45, and magnetic resonance...
Mechanical loading of the distal end of the third metacarpal bone in horses during walking and trotting. To assess the net mechanical load on the distal end of the third metacarpal bone in horses during walking and trotting. Methods: 3 Quarter Horses and 1 Thoroughbred. Methods: Surface strains measured on the left third metacarpal bone of the Thorough-bred were used with a subject-specific model to calculate loading (axial compression, bending, and torsion) of the structure during walking and trotting. Forelimb kinematics and ground reaction forces measured in the 3 Quarter Horses were used with a musculoskeletal model of the distal portion of the forelimb to determine loading of the distal end ...
Mechanical evaluation of the equine laryngoplasty. Mechanical evaluation of the equine laryngoplasty. Methods: Experimental. Methods: Cadaveric cricoid (n=36) and arytenoid (46) cartilages. Methods: Arytenoid and cricoid cartilage specimens were embedded for testing. Suture material (2 Ethilon, 5 Ethibond, or 5 Fiberwire) was inserted simulating laryngoplasty procedures. Constructs were evaluated in single or cyclic loading. Single cycle tests recorded load at failure and stiffness. Cyclical tests recorded displacement after 10,000 cycles. ANOVA and t-tests were used (significance P<.05). Results: The arytenoid Ethibond (241.10+/-47.67 N) cons...
A pendulum test as a tool to evaluate viscous friction parameters in the equine fetlock joint. An equine fetlock joint pendulum test was studied and the influence of post mortem time and intra-articular lipid solvent on the viscous frictional response examined. Fresh equine digits (group 1, n=6 controls; group 2, n=6 lipid solvent) were mounted on a pendulum tribometer. Assuming that pendular joint damping could be modelled by a harmonic oscillator fluid damping (HOFD), damping time (τ), viscous damping coefficient (c) and friction coefficient (μ) were monitored for 5h under experimental conditions (400N; 20°C). In all experiments, pendular joint damping was found to follow an expone...
In vitro evaluation of allogeneic bone screws for use in internal fixation of transverse fractures created in proximal sesamoid bones obtained from equine cadavers. To evaluate effectiveness of allogeneic bone screws and pins for internal fixation of midbody transverse fractures of equine proximal sesamoid bones (PSBs) in vitro. Methods: 14 forelimbs from cadavers of 3-year-old Thoroughbreds. Methods: Allogeneic cortical bone fragments were collected from the limbs of a male Thoroughbred, and cortical bone screws were prepared from the tissue by use of a precision desktop microlathe programmed with the dimensions of a metal cortical bone screw. A midbody transverse osteotomy of each PSB was performed by use of a bone-shaping oscillating saw and repaired v...
Arthrodesis of the proximal interphalangeal joint in the horse: a cyclic biomechanical comparison of two and three parallel cortical screws inserted in lag fashion. To compare the biomechanical cyclic fatigue properties of 2 and 3 parallel transarticular 5.5 mm cortical screws used in arthrodesis of the proximal interphalangeal (PIP) joint. Methods: Randomized block design, for horse, fixation method (2 versus three 5.5 mm cortical screws), side (right, left) and end (front, hind) in cadaveric equine limbs. Methods: Cadaveric adult equine fore- and hindlimbs (n=5 pairs each). Methods: Two parallel 5.5 mm cortical screws were inserted in lag fashion, transarticularly through the PIP joint in 1 limb of a pair, and in the contralateral limb, three 5.5 mm cor...
Compressive forces achieved in simulated equine third metacarpal bone lateral condylar fractures of varying fragment thickness with Acutrak Plus screw and 4.5 mm AO cortical screws. To compare compression pressure (CP) of 6.5 mm Acutrak Plus (AP) and 4.5 mm AO cortical screws (AO) when inserted in simulated lateral condylar fractures of equine 3rd metacarpal (MC3) bones. Methods: Paired in vitro biomechanical testing. Methods: Cadaveric equine MC3 bones (n=12 pair). Methods: Complete lateral condylar osteotomies were created parallel to the midsagittal ridge at 20, 12, and 8 mm axial to the epicondylar fossa on different specimens grouped accordingly. Interfragmentary compression was measured using a pressure sensor placed in the fracture plane before screw placement for ...
An in vitro biomechanical comparison of equine proximal interphalangeal joint arthrodesis techniques: an axial positioned dynamic compression plate and two abaxial transarticular cortical screws inserted in lag fashion versus three parallel transarticular cortical screws inserted in lag fashion. To compare in vitro monotonic biomechanical properties of an axial 3-hole, 4.5 mm narrow dynamic compression plate (DCP) using 5.5 mm cortical screws in conjunction with 2 abaxial transarticular 5.5 mm cortical screws inserted in lag fashion (DCP-TLS) with 3 parallel transarticular 5.5 mm cortical screws inserted in lag fashion (3-TLS) for the equine proximal interphalangeal (PIP) joint arthrodesis. Methods: Paired in vitro biomechanical testing of 2 methods of stabilizing cadaveric adult equine forelimb PIP joints. Methods: Cadaveric adult equine forelimbs (n=15 pairs). Methods: For each fore...
Comparison of the morphology of the limbs of juvenile and adult horses (Equus caballus) and their implications on the locomotor biomechanics. We analyzed the morphology and the walk-trot and trot-gallop transition velocities of nine juvenile horses and compared them with their mothers. We also compared the relative stride length and the duty factor of the juveniles with respect to adults at three equivalent trotting speeds (Froude numbers 0.5, 0.75, and 1.0), to determine dynamic similarity. Juveniles had a negative allometry in their leg bones, mainly because of little size changes of the distal portions. The negative allometry of extremities allows juveniles to increase stride length without increasing step frequency, which can be...
Biomechanical and molecular characteristics of hereditary equine regional dermal asthenia in Quarter Horses. Hereditary equine regional dermal asthenia (HERDA) is an autosomal recessive skin disorder that has yet to be fully characterized. HERDA is predominately expressed in Quarter Horses, with the majority of these disseminating from elite cutting horse bloodlines, leading to the increased incidence of HERDA in recent years. Affected horses have loose, hyper-extensible, fragile skin and are frequently euthanized due to poor wound healing and disfiguring scars. This study sought to better characterize HERDA by analysis of the biomechanical parameters of tensile strength, modulus of elasticity, energ...
The effects of different saddle pads on forces and pressure distribution beneath a fitting saddle. Saddle pads are widely used in riding sports but their influence on saddle pressures is poorly understood. Objective: To evaluate the forces acting on the horse's back, and the eventual pressure distribution by using different saddle pads underneath a fitting saddle. Methods: Sixteen sound horses of different breeds and ages were ridden on a treadmill at walk and sitting trot. The horses were wearing a dressage saddle with a fitting saddle tree and 4 different saddle pads (gel, leather, foam and reindeer fur) successively. For comparison, measurements were made without any saddle pad. Right fo...
Effect of diet on mechanical properties of horse’s hair. The aim of this research was to assess the effect of diet supplementation with zinc and copper, in different chemical forms (organic and inorganic), on the mechanical properties of the hair of healthy English thoroughbred horses. Hairs were taken from 18 horses which had been fed with oats and hay for a period of 110 days. Twelve of the horses had been additionally given a daily dose of 700 g of highquality 44-ingredients Fohlengold St-Hippolyt muesli made by Muhle Ebert Dilheim. Six of them had received the muesli-containing organic zinc and copper (OS), while the other six horses had receive...
