Omneity® Pellets
All-In-One Vitamin & Mineral Pellet
Topic:Biomechanics
Biomechanics in horses refers to the study of the mechanical principles that govern movement and physical function in equine species. This field encompasses the analysis of gait, locomotion, and the forces exerted by and upon the horse's musculoskeletal system. Biomechanical studies often involve the use of motion capture technology, force plates, and computer modeling to assess how horses move and how various factors, such as conformation, training, and health status, influence their performance and soundness. Research in equine biomechanics contributes to understanding injury prevention, rehabilitation, and performance optimization. This page compiles peer-reviewed research studies and scholarly articles that explore the mechanics of movement, the impact of external and internal forces, and the applications of biomechanical analysis in equine care and management.
Kinematic characteristics of hoof landing in jumping horses at elite level. Biomechanical events of the distal limb during the landing phase of a jump have been proposed to be risk factors for injury, indicating need for further characterisation of the landing and the hoof-surface interaction. This is essential also for valid testing of arena surfaces when simulating actual conditions. Objective: To investigate the hoof landing characteristics for different limbs of elite showjumping horses during the landing phase when jumping 1.30-1.50 m competition fences on 2 different arena surfaces. Methods: A single, fixed high speed camera (1000 frames/s) was aimed at landing ...
Saddle pressure patterns of three different training saddles (normal tree, flexible tree, treeless) in Thoroughbred racehorses at trot and gallop. To a large extent the success of a racehorse depends on effective and health preserving training methods. An important issue is the prevention of back pain. The influence of different types of training saddles (normal tree: S(A), treeless: S(B), flexible tree: S(C)) on the saddle pressure patterns in racehorses have not previously been investigated. It is commonly assumed that S(A) limits the motion of the back especially in the lower thoracic region during gallop. Objective: S(A) produces higher pressures in the caudal part of the saddle at trot (rising trot), canter and gallop (both in a joc...
Saddle and leg forces during lateral movements in dressage. In the equestrian world it is assumed that riders use changes in weight distribution and leg forces as important instruments to give horses directions about speed and direction of movement. However, the changes of these forces have never been quantified. Objective: To investigate the distribution of normal forces (perpendicular to surface) underneath the saddle and of normal forces exerted by the rider's legs during lateral movements. Methods: Eleven riders performed 3 different exercises: riding straight ahead, shoulder-in and travers at trot. Three saddle force systems were used simultaneous...
Biomechanical analysis of hoof landing and stride parameters in harness trotter horses running on different tracks of a sand beach (from wet to dry) and on an asphalt road. Sandy beaches are often considered good training surfaces for trotter horses. However, their biomechanical effects on locomotion are insufficiently documented. Events at hoof impact have mostly been studied under laboratory conditions with accelerometers, but there is lack of data (acceleration, force, movement) on events occurring under every day practical conditions in the field. Objective: To investigate hoof landing and stride parameters on different tracks (from wet to dry) of a sand beach and on an asphalt road. Methods: The right front hoof of 4 trotter horses was equipped with a triaxi...
Ground reaction force and kinematic analysis of limb loading on two different beach sand tracks in harness trotters. Although beach training is commonly used in horses, limb loading on beach sand has never been investigated. A dynamometric horseshoe (DHS) is well adapted for this purpose. Objective: To compare ground reaction force (GRF) and fetlock kinematics measured in harness trotters on 2 tracks of beach sand with different water content. Methods: Two linear sand tracks were compared: firm wet sand (FWS, 19% moisture) vs. deep wet sand (DWS, 13.5% moisture). Four French trotters (550 ± 22 kg) were used. Their right forelimb was equipped with a DHS and skin markers. Each track was tested 3 times at 7 m/...
Use of an implantable transducer to measure force in the superficial digital flexor tendon in horses at walk, trot and canter on a treadmill. Although the main cause of injury to the superficial digital flexor tendon (SDFT) is assumed to be high intensity loading of the tendon, to date the forces exerted on the SDFT during cantering have never been measured. Objective: To measure the force exerted on the SDFT at walk, trot and canter on a treadmill. Methods: Arthroscopically implantable force probes (AIFP) were implanted in the SDFT of the left and right forelimbs of 8 Thoroughbred horses (480-565 kg). The output of the AIFP was calibrated using the SDFT force calculated by inverse dynamics and an in vitro model of the lower forelim...
Horizontal moment around the hoof centre of pressure during walking on right and left circles. Recent research indicates that the digital joints experience some degree of extrasagittal motion during stance and that the moments under the hoof are asymmetric in horses walking in a straight line. On a circle, these have not been defined. Objective: To quantify the amplitude and symmetry of horizontal twisting moments around the vertical axis through the hoof's centre of pressure on left and right circles at walk. Methods: Six Thoroughbred horses were led at walk across a Kistler force platform on a left and a right circle of 5 m radius. The resultant moment around the hoof was calculated f...
Fractures of the distal phalanx and associated soft tissue and osseous abnormalities in 22 horses with ossified sclerotic ungual cartilages diagnosed with magnetic resonance imaging. Ungual cartilage ossification in the forelimb is a common finding in horses. Subtle abnormalities associated with the ungual cartilages can be difficult to identify on radiographs. Magnetic resonance (MR) imaging findings of 22 horses (23 forelimbs) with a fracture of the distal phalanx and ossified ungual cartilage were characterized and graded. All horses had a forelimb fracture. Eleven involved a left forelimb (seven medial; four lateral), and 12 involved a right forelimb (five medial; seven lateral). All fractures were nonarticular, simple in configuration, and nondisplaced. The fractures ...
The effect of anisotropic collagen-GAG scaffolds and growth factor supplementation on tendon cell recruitment, alignment, and metabolic activity. Current surgical and tissue engineering approaches for treating tendon injuries have shown limited success, suggesting the need for new biomaterial strategies. Here we describe the development of an anisotropic collagen-glycosaminoglycan (CG) scaffold and use of growth factor supplementation strategies to create a 3D platform for tendon tissue engineering. We fabricated cylindrical CG scaffolds with aligned tracks of ellipsoidal pores that mimic the native physiology of tendon by incorporating a directional solidification step into a conventional lyophilization strategy. By modifying the freez...
Biomechanical characterisation of equine laryngeal cartilage. Upper airway obstruction is a common problem in the performance horse as the soft tissues of the larynx collapse into the airway, yet there is a paucity of information on biomechanical properties for the structural cartilage components. Objective: To measure the geometry and compressive mechanical properties of the hyaline cartilage to improve understanding of laryngeal function and morphology. Methods: A total of 11 larynges were harvested from Thoroughbred and Standardbred racehorses. During gross dissection, linear dimensions of the cricoid were obtained. From both the cricoid and arytenoid...
In vitro biomechanical comparison of dynamic compression plates with a rough contact surface and a polished contact surface for fixation of osteotomized equine third metacarpal bones. To compare the number of cycles to failure of 4.5 mm broad dynamic compression plates (DCP), 4.5 mm broad limited-contact dynamic compression plates (4.5-LC-DCP), and 5.5 mm broad limited-contact dynamic compression plates (5.5-LC-DCP) having a rough (denoted by a prefix R-) versus a standard smooth contact surface for the fixation of osteotomized equine 3rd metacarpal (MC3) bones. Methods: Experimental. Methods: Fifteen pairs of adult equine cadaveric MC3 bones. Methods: Fifteen pairs of equine MC3 were divided into 3 test groups (5 pairs each) for comparison of (1) R-DCP fixation with DCP fi...
Effects of industrial polystyrene foam insulation pads on the center of pressure and load distribution in the forefeet of clinically normal horses. To evaluate the ability of industrial polystyrene foam insulation pads to redistribute loads placed on clinically normal weight-bearing structures of the foot and shift the location of the center of pressure palmarly in horses. Methods: 25 nonlame mature horses. Methods: Both forefeet from each horse were evaluated. Center of pressure data and solar load distribution patterns were recorded during a 5-second trial by use of a commercial pressure measurement system prior to placement of foam sole support and at 0, 6, 12, 24, and 48 hours after placement. Total contact surface area, contact press...
A mechanical comparison of equine proximal interphalangeal joint arthrodesis techniques: an axial locking compression plate and two abaxial transarticular cortical screws versus an axial dynamic compression plate and two abaxial transarticular cortical screws. To compare in vitro monotonic biomechanical properties of an axial 3-hole, 4.5 mm narrow locking compression plate (ELCP) using 5.0 mm locking screws and 5.5 mm cortical screws in conjunction with 2 abaxial transarticular 5.5 mm cortical screws inserted in lag fashion (ELCP-TLS) with an axial 3-hole, 4.5 mm narrow dynamic compression plate (DCP) using 5.5 mm cortical screws in conjunction with 2 abaxial transarticular 5.5 mm cortical screws inserted in lag fashion (DCP-TLS) for equine proximal interphalangeal (PIP) joint arthrodesis. Methods: Experimental. Methods: Cadaveric adult equine forel...
Center-of-pressure movements during equine-assisted activities. We compared anteroposterior and mediolateral range of motion and velocity of the center of pressure (COP) on the horse's back between riders without disabilities and riders with cerebral palsy. An electronic pressure mat was used to track COP movements beneath the saddle in 4 riders without disabilities and 4 riders with cerebral palsy. Comparisons between rider groups were made using the Mann-Whitney test (p < .05). The two rider groups differed significantly in anteroposterior range of COP motion, mediolateral range of COP motion, and mediolateral COP velocity. Anteroposterior COP velocit...
The mathematical description of the body centre of mass 3D path in human and animal locomotion. Although the 3D trajectory of the body centre of mass during ambulation constitutes the 'locomotor signature' at different gaits and speeds for humans and other legged species, no quantitative method for its description has been proposed in the literature so far. By combining the mathematical discoveries of Jean Baptiste Joseph Fourier (1768-1830, analysis of periodic events) and of Jules Antoine Lissajous (1822-1880, parametric equation for closed loops) we designed a method simultaneously capturing the spatial and dynamical features of that 3D trajectory. The motion analysis of walking and r...
Changes in hoof surface strain distribution in response to moderate exercise in Standardbreds. To quantify changes in hoof wall strain distribution associated with exercise and time in Standardbreds. Methods: 18 young adult Standardbreds. Methods: 9 horses were exercised 4 d/wk for 30 to 45 minutes at a medium trot for 4 months; 9 nonexercised horses served as the control group. Rosette strain gauges were used to measure the principal surface strains at the toe, lateral quarter of the hoof wall (LQ), and medial quarter of the hoof wall (MQ) of the right forefoot at the beginning and end of the experiment. Midstance maximal (msϵ1) and minimal (msϵ2) principal and peak minimal principal...
Effect of differences in tendon properties on functionality of the passive stay apparatus in horses. To determine the effect of differences in structural and mechanical tendon properties on functionality of the passive stay apparatus in horses. Methods: 5 forelimbs each from nondwarf Friesians, dwarf Friesians, and ponies. Methods: Harvested forelimbs were loaded to test the passive stay apparatus. Tendons that stabilize the distal portion of the limb (superficial digital flexor tendon, deep digital flexor tendon, and tendo interosseus [suspensory ligament]) were isolated, and force-elongation data were obtained. Bone lengths, initial tendon lengths, and initial tendon cross-sectional areas w...
Evaluation of a minimally invasive arthrodesis technique for the carpometacarpal joint in horses. To evaluate a minimally invasive technique for arthrodesis of the carpometacarpal (CMC) joint in horses. Methods: Experimental study. Methods: Healthy horses (n=6). Methods: A 5.5 mm, 3-drill tract arthrodesis technique was evaluated in 1 randomly selected CMC joint in each of 6 normal horses. Peak vertical ground reaction force (GRF) values were recorded before surgery and at 6, 8, and 12 months thereafter. Radiographic and clinical lameness scores were assigned at regular intervals until 12 months after surgery when the horses were euthanatized. Gross and histologic examinations were perfo...
The effect of hoof angle variations on dorsal lamellar load in the equine hoof. In the treatment of laminitis it is believed that reducing tension in the deep digital flexor tendon by raising the palmar angle of the hoof can reduce the load on the dorsal lamellae, allowing them to heal or prevent further damage. Objective: To determine the effect of alterations in hoof angle on the load in the dorsal laminar junction. Methods: Biomechanical finite element models of equine hooves were created with palmar angles of the distal phalanx varying from 0-15°. Tissue material relations accounting for anisotropy and the effect of moisture were used. Loading conditions simulating t...
The difference in kinematics of horses walking, trotting and cantering on a flat and banked 10 m circle. Locomotion adaptation mechanisms have been observed in horses, but little information is available in relation to banked and nonbanked curve locomotion, which might be important to optimise training environments. Objective: To determine if adaptation mechanisms in horses existed when moving on a banked compared to a flat curve and whether adaptation was similar in different gaits. Methods: Eight infrared cameras were positioned on the outside of a 10 m lungeing circle and calibrated. Retroreflective markers were used to define left and right metacarpus (McIII) and proximal phalanges (P1), meta...
An in vitro biomechanical comparison of equine proximal interphalangeal joint arthrodesis techniques: two parallel transarticular headless tapered variable pitch screws versus two parallel transarticular AO cortical bone screws inserted in lag fashion. To compare the mean number of cycles to failure under axial compression of equine proximal interphalangeal (PIP) joint arthrodesis constructs created by 2 parallel transarticular Acutrak Plus screws (AP-TS) or 2 parallel transarticular 5.5 mm cortical screws inserted in lag fashion (AO-TLS). Methods: Paired in vitro biomechanical testing of 2 methods of stabilizing cadaveric adult equine forelimb PIP joints. Methods: Cadaveric adult equine forelimbs (n=5 pairs). Methods: For each forelimb pair, 1 PIP joint was stabilized with AP-TS and 1 with AP-TLS. The 5 construct pairs were tested for cycli...
Inertial properties of equine limb segments. Quantifying the dynamics of limb movements requires knowledge of the mass distribution between and within limb segments. We measured segment masses, positions of segmental center of mass and moments of inertia of the fore and hind limb segments for 38 horses of different breeds and sizes. After disarticulation by dissections, segments were weighed and the position of the center of mass was determined by suspension. Moment of inertia was measured using a trifilar pendulum. We found that mass distribution does not change with size for animals under 600 kg and report ratios of segmental masses to...
Statistical analysis of bone mineral density using voxel-based morphometry-an application on proximal sesamoid bones in racehorses. Voxel-based morphometry (VBM) is a computational technique that has been used to analyze statistical differences between groups of MR brain images. This study outlines a new VBM pipeline, designed for determining statistical variation in bone mineral density (BMD). CT images of proximal sesamoid bone (PSB) specimens from the right forelimb of six racehorses that had suffered PSB fractures were compared with six age-matched control specimens. Following segmentation, masked gray-scale images were co-aligned to a statistical template generated with all 12 CT datasets iteratively. Student t-tests ...
Analysis of osteon morphotype scoring schemes for interpreting load history: evaluation in the chimpanzee femur. Osteon morphotype scores (MTSs) allow for quantification of mechanically important collagen/lamellar variations between secondary osteons when viewed in circularly polarized ight (CPL). We recently modified the 6-point MTS method of Martin et al. (Martin RB, Gibson VA, Stover SM, Gibeling JC, Griffin LV (1996a) Osteonal structure in the equine third metacarpus. Bone 19, 165-71) and reported superiority of this modified method in correlating with 'tension' and 'compression' cortices of both chimpanzee proximal femoral diaphyses and diaphyses of other non-anthropoid bones that are loaded in habi...
In vitro effect of ventriculocordectomy before laryngoplasty on abduction of the equine arytenoid cartilage. To determine whether ventriculocordectomy (VCE) performed before prosthetic laryngoplasty (PL) results in increased rima glottidis size compared with PL alone. Methods: Experimental study. Methods: Equine cadaver larynges (n=13). Methods: Right arytenoid cartilages were maximally abducted using a standard PL technique. Standard PLs were then performed on the left side and the force required to maximally abduct the left arytenoid cartilage recorded (F(max) ). Photographs were taken of the rima glottidis at zero force and at five equal levels of force up to F(max) . The force applied was release...
Differences in Muscle Fiber Recruitment Patterns between Continuous and Interval Exercises. We evaluated differences in muscle fiber recruitment patterns between continuous and interval training to develop an optimal training program for Thoroughbred horses. Five well trained female thoroughbred horses (3-4 years old) were used. The horses performed two different exercises on a 10% inclined treadmill: 90%VO2 max for 4 min (continuous) and 90% VO2 max for 2 min × 2 times with 10-min interval (interval). Muscle samples were obtained from the middle gluteal muscle before and immediately after the exercises. Four muscle fiber types (type I, IIA, IIA/X, and IIX) were immunohistochemicall...
Optic axis determination by fibre-based polarization-sensitive swept-source optical coherence tomography. We describe a fibre-based variable-incidence angle (VIA) polarization-sensitive swept-source optical coherence tomography (PS-SS-OCT) system to determine the 3D optical axis of birefringent biological tissues. Single-plane VIA-PS-OCT is also explored which requires measurement of the absolute fast-axis orientation. A state-of-the-art PS-SS-OCT system with some improvements both in hardware and software was used to determine the apparent optical birefringence of equine tendon for a number of different illumination directions. Polar and azimuthal angles of cut equine tendon were produced by the ...
Arthrodesis of the equine proximal interphalangeal joint: a biomechanical comparison of 3-hole 4.5 mm locking compression plate and 3-hole 4.5 mm narrow dynamic compression plate, with two transarticular 5.5 mm cortex screws. To compare the biomechanical characteristics of 2 arthrodesis techniques for the equine proximal interphalangeal joint (PIP) using either a 3-hole 4.5 mm locking compression plate (LCP) or 3-hole 4.5 mm narrow dynamic compression plate (DCP), both with 2 transarticular 5.5 mm cortex screws. Methods: Experimental. Methods: Cadaveric adult equine forelimbs (*n=6 pairs). Methods: For each forelimb pair, 1 limb was randomly assigned to 1 of 2 treatment groups and the contralateral limb by default to the other treatment group. Construct stiffness, gap formation across the PIP joint, and rotation ab...
