Omneity® Pellets
All-In-One Vitamin & Mineral Pellet
Topic:Biomechanics
Biomechanics in horses refers to the study of the mechanical principles that govern movement and physical function in equine species. This field encompasses the analysis of gait, locomotion, and the forces exerted by and upon the horse's musculoskeletal system. Biomechanical studies often involve the use of motion capture technology, force plates, and computer modeling to assess how horses move and how various factors, such as conformation, training, and health status, influence their performance and soundness. Research in equine biomechanics contributes to understanding injury prevention, rehabilitation, and performance optimization. This page compiles peer-reviewed research studies and scholarly articles that explore the mechanics of movement, the impact of external and internal forces, and the applications of biomechanical analysis in equine care and management.
Effects of industrial polystyrene foam insulation pads on the center of pressure and load distribution in the forefeet of clinically normal horses. To evaluate the ability of industrial polystyrene foam insulation pads to redistribute loads placed on clinically normal weight-bearing structures of the foot and shift the location of the center of pressure palmarly in horses. Methods: 25 nonlame mature horses. Methods: Both forefeet from each horse were evaluated. Center of pressure data and solar load distribution patterns were recorded during a 5-second trial by use of a commercial pressure measurement system prior to placement of foam sole support and at 0, 6, 12, 24, and 48 hours after placement. Total contact surface area, contact press...
A mechanical comparison of equine proximal interphalangeal joint arthrodesis techniques: an axial locking compression plate and two abaxial transarticular cortical screws versus an axial dynamic compression plate and two abaxial transarticular cortical screws. To compare in vitro monotonic biomechanical properties of an axial 3-hole, 4.5 mm narrow locking compression plate (ELCP) using 5.0 mm locking screws and 5.5 mm cortical screws in conjunction with 2 abaxial transarticular 5.5 mm cortical screws inserted in lag fashion (ELCP-TLS) with an axial 3-hole, 4.5 mm narrow dynamic compression plate (DCP) using 5.5 mm cortical screws in conjunction with 2 abaxial transarticular 5.5 mm cortical screws inserted in lag fashion (DCP-TLS) for equine proximal interphalangeal (PIP) joint arthrodesis. Methods: Experimental. Methods: Cadaveric adult equine forel...
Center-of-pressure movements during equine-assisted activities. We compared anteroposterior and mediolateral range of motion and velocity of the center of pressure (COP) on the horse's back between riders without disabilities and riders with cerebral palsy. An electronic pressure mat was used to track COP movements beneath the saddle in 4 riders without disabilities and 4 riders with cerebral palsy. Comparisons between rider groups were made using the Mann-Whitney test (p < .05). The two rider groups differed significantly in anteroposterior range of COP motion, mediolateral range of COP motion, and mediolateral COP velocity. Anteroposterior COP velocit...
The mathematical description of the body centre of mass 3D path in human and animal locomotion. Although the 3D trajectory of the body centre of mass during ambulation constitutes the 'locomotor signature' at different gaits and speeds for humans and other legged species, no quantitative method for its description has been proposed in the literature so far. By combining the mathematical discoveries of Jean Baptiste Joseph Fourier (1768-1830, analysis of periodic events) and of Jules Antoine Lissajous (1822-1880, parametric equation for closed loops) we designed a method simultaneously capturing the spatial and dynamical features of that 3D trajectory. The motion analysis of walking and r...
Changes in hoof surface strain distribution in response to moderate exercise in Standardbreds. To quantify changes in hoof wall strain distribution associated with exercise and time in Standardbreds. Methods: 18 young adult Standardbreds. Methods: 9 horses were exercised 4 d/wk for 30 to 45 minutes at a medium trot for 4 months; 9 nonexercised horses served as the control group. Rosette strain gauges were used to measure the principal surface strains at the toe, lateral quarter of the hoof wall (LQ), and medial quarter of the hoof wall (MQ) of the right forefoot at the beginning and end of the experiment. Midstance maximal (msϵ1) and minimal (msϵ2) principal and peak minimal principal...
Effect of differences in tendon properties on functionality of the passive stay apparatus in horses. To determine the effect of differences in structural and mechanical tendon properties on functionality of the passive stay apparatus in horses. Methods: 5 forelimbs each from nondwarf Friesians, dwarf Friesians, and ponies. Methods: Harvested forelimbs were loaded to test the passive stay apparatus. Tendons that stabilize the distal portion of the limb (superficial digital flexor tendon, deep digital flexor tendon, and tendo interosseus [suspensory ligament]) were isolated, and force-elongation data were obtained. Bone lengths, initial tendon lengths, and initial tendon cross-sectional areas w...
Evaluation of a minimally invasive arthrodesis technique for the carpometacarpal joint in horses. To evaluate a minimally invasive technique for arthrodesis of the carpometacarpal (CMC) joint in horses. Methods: Experimental study. Methods: Healthy horses (n=6). Methods: A 5.5 mm, 3-drill tract arthrodesis technique was evaluated in 1 randomly selected CMC joint in each of 6 normal horses. Peak vertical ground reaction force (GRF) values were recorded before surgery and at 6, 8, and 12 months thereafter. Radiographic and clinical lameness scores were assigned at regular intervals until 12 months after surgery when the horses were euthanatized. Gross and histologic examinations were perfo...
The effect of hoof angle variations on dorsal lamellar load in the equine hoof. In the treatment of laminitis it is believed that reducing tension in the deep digital flexor tendon by raising the palmar angle of the hoof can reduce the load on the dorsal lamellae, allowing them to heal or prevent further damage. Objective: To determine the effect of alterations in hoof angle on the load in the dorsal laminar junction. Methods: Biomechanical finite element models of equine hooves were created with palmar angles of the distal phalanx varying from 0-15°. Tissue material relations accounting for anisotropy and the effect of moisture were used. Loading conditions simulating t...
The difference in kinematics of horses walking, trotting and cantering on a flat and banked 10 m circle. Locomotion adaptation mechanisms have been observed in horses, but little information is available in relation to banked and nonbanked curve locomotion, which might be important to optimise training environments. Objective: To determine if adaptation mechanisms in horses existed when moving on a banked compared to a flat curve and whether adaptation was similar in different gaits. Methods: Eight infrared cameras were positioned on the outside of a 10 m lungeing circle and calibrated. Retroreflective markers were used to define left and right metacarpus (McIII) and proximal phalanges (P1), meta...
An in vitro biomechanical comparison of equine proximal interphalangeal joint arthrodesis techniques: two parallel transarticular headless tapered variable pitch screws versus two parallel transarticular AO cortical bone screws inserted in lag fashion. To compare the mean number of cycles to failure under axial compression of equine proximal interphalangeal (PIP) joint arthrodesis constructs created by 2 parallel transarticular Acutrak Plus screws (AP-TS) or 2 parallel transarticular 5.5 mm cortical screws inserted in lag fashion (AO-TLS). Methods: Paired in vitro biomechanical testing of 2 methods of stabilizing cadaveric adult equine forelimb PIP joints. Methods: Cadaveric adult equine forelimbs (n=5 pairs). Methods: For each forelimb pair, 1 PIP joint was stabilized with AP-TS and 1 with AP-TLS. The 5 construct pairs were tested for cycli...
Inertial properties of equine limb segments. Quantifying the dynamics of limb movements requires knowledge of the mass distribution between and within limb segments. We measured segment masses, positions of segmental center of mass and moments of inertia of the fore and hind limb segments for 38 horses of different breeds and sizes. After disarticulation by dissections, segments were weighed and the position of the center of mass was determined by suspension. Moment of inertia was measured using a trifilar pendulum. We found that mass distribution does not change with size for animals under 600 kg and report ratios of segmental masses to...
Statistical analysis of bone mineral density using voxel-based morphometry-an application on proximal sesamoid bones in racehorses. Voxel-based morphometry (VBM) is a computational technique that has been used to analyze statistical differences between groups of MR brain images. This study outlines a new VBM pipeline, designed for determining statistical variation in bone mineral density (BMD). CT images of proximal sesamoid bone (PSB) specimens from the right forelimb of six racehorses that had suffered PSB fractures were compared with six age-matched control specimens. Following segmentation, masked gray-scale images were co-aligned to a statistical template generated with all 12 CT datasets iteratively. Student t-tests ...
Analysis of osteon morphotype scoring schemes for interpreting load history: evaluation in the chimpanzee femur. Osteon morphotype scores (MTSs) allow for quantification of mechanically important collagen/lamellar variations between secondary osteons when viewed in circularly polarized ight (CPL). We recently modified the 6-point MTS method of Martin et al. (Martin RB, Gibson VA, Stover SM, Gibeling JC, Griffin LV (1996a) Osteonal structure in the equine third metacarpus. Bone 19, 165-71) and reported superiority of this modified method in correlating with 'tension' and 'compression' cortices of both chimpanzee proximal femoral diaphyses and diaphyses of other non-anthropoid bones that are loaded in habi...
In vitro effect of ventriculocordectomy before laryngoplasty on abduction of the equine arytenoid cartilage. To determine whether ventriculocordectomy (VCE) performed before prosthetic laryngoplasty (PL) results in increased rima glottidis size compared with PL alone. Methods: Experimental study. Methods: Equine cadaver larynges (n=13). Methods: Right arytenoid cartilages were maximally abducted using a standard PL technique. Standard PLs were then performed on the left side and the force required to maximally abduct the left arytenoid cartilage recorded (F(max) ). Photographs were taken of the rima glottidis at zero force and at five equal levels of force up to F(max) . The force applied was release...
Differences in Muscle Fiber Recruitment Patterns between Continuous and Interval Exercises. We evaluated differences in muscle fiber recruitment patterns between continuous and interval training to develop an optimal training program for Thoroughbred horses. Five well trained female thoroughbred horses (3-4 years old) were used. The horses performed two different exercises on a 10% inclined treadmill: 90%VO2 max for 4 min (continuous) and 90% VO2 max for 2 min × 2 times with 10-min interval (interval). Muscle samples were obtained from the middle gluteal muscle before and immediately after the exercises. Four muscle fiber types (type I, IIA, IIA/X, and IIX) were immunohistochemicall...
Optic axis determination by fibre-based polarization-sensitive swept-source optical coherence tomography. We describe a fibre-based variable-incidence angle (VIA) polarization-sensitive swept-source optical coherence tomography (PS-SS-OCT) system to determine the 3D optical axis of birefringent biological tissues. Single-plane VIA-PS-OCT is also explored which requires measurement of the absolute fast-axis orientation. A state-of-the-art PS-SS-OCT system with some improvements both in hardware and software was used to determine the apparent optical birefringence of equine tendon for a number of different illumination directions. Polar and azimuthal angles of cut equine tendon were produced by the ...
Arthrodesis of the equine proximal interphalangeal joint: a biomechanical comparison of 3-hole 4.5 mm locking compression plate and 3-hole 4.5 mm narrow dynamic compression plate, with two transarticular 5.5 mm cortex screws. To compare the biomechanical characteristics of 2 arthrodesis techniques for the equine proximal interphalangeal joint (PIP) using either a 3-hole 4.5 mm locking compression plate (LCP) or 3-hole 4.5 mm narrow dynamic compression plate (DCP), both with 2 transarticular 5.5 mm cortex screws. Methods: Experimental. Methods: Cadaveric adult equine forelimbs (*n=6 pairs). Methods: For each forelimb pair, 1 limb was randomly assigned to 1 of 2 treatment groups and the contralateral limb by default to the other treatment group. Construct stiffness, gap formation across the PIP joint, and rotation ab...
Association between navicular bone fragmentation and shape in Belgian Warmblood horses. To investigate whether in navicular bones (NB) from warmbloods, distal border fragmentation is associated with the shape of the proximal articular border or other radiological findings. Methods: Radiographs of the front feet of 325 normal, subadult horses presented for admission as breeding stallions were reviewed. Results: The proximal articular border of the total of 650 NB was classified as straight (n = 278), convex (n = 184), undulating (n = 147) or concave (n = 41). Distal border fragments were present in 57 NB (8.8%). They were significantly more prevalent in NB with a concave (9/41; 22...
Core decompression of the equine navicular bone: an in vitro biomechanical study. To determine the effect of core decompression surgery and bone mineral density (BMD) on the mechanical properties of equine navicular bones. Methods: Experimental, in vitro study. Methods: Fore limb navicular bones (n=36 pairs) from sound 2-5-year-old horses with no radiographic abnormalities of the distal aspect of the forelimbs. Methods: Navicular BMD was measured using dual energy X-ray absorptiometry. One randomly assigned navicular bone from each pair served as control. The contralateral test specimen was allocated to 1 of 6 treatment groups defined by drill bit size (3.2 versus 2.5 mm di...
Mediolateral hoof balance in relation to the handedness of apprentice farriers. Horses that had been trimmed and shod by apprentice farriers were sourced from the Royal School of Military Engineering, Melton Mowbray (37 horses) and from the Household Cavalry, Knightsbridge (54 horses). The lateral and medial hoof wall angles of both forelimbs were measured using a Ruidoso hoof gauge by the same operator. The difference between the lateral and medial hoof wall angles for each horse was calculated and the results were compared between right-handed and left-handed farriers using the Mann-Whitney U test (P<0.05). There was a significant difference in the mediolateral hoof bal...
Finite element analysis of a novel pin-sleeve system for external fixation of distal limb fractures in horses. The transfixation pin cast (TPC) is an external skeletal fixation technique used to treat horses with distal limb fractures, but its use is often associated with pin-loosening and an increased risk of treatment failure. To address implant loosening, the pin sleeve cast system (PSC) was recently designed and consists of a pin-sleeve unit inserted into the bone. Each pin runs through a sleeve placed in the bone, making contact at two fixed points only within the sleeve. Each pin is attached to a ring embedded in a resin cast. In this report, the mechanical performance of a traditional TPC pin ar...
Mild exercise early in life produces changes in bone size and strength but not density in proximal phalangeal, third metacarpal and third carpal bones of foals. Exercise or lack of it in early life affects chondro-osseous development. Two groups of horses were used to investigate the effects of age and exercise regimen on bone parameters of diaphyseal, metaphyseal, epiphyseal and cuboidal bones of the distal limb of Thoroughbreds. One group had exercised only spontaneously from an early age at pasture (PASTEX group), while the other group of horses were exposed to a 30% greater workload through additional defined exercise (CONDEX). Longitudinal data from peripheral quantitative computed tomography (pQCT) were obtained from eight scan sites of the left...
Grip and limb force limits to turning performance in competition horses. Manoeuverability is a key requirement for successful terrestrial locomotion, especially on variable terrain, and is a deciding factor in predator-prey interaction. Compared with straight-line running, bend running requires additional leg force to generate centripetal acceleration. In humans, this results in a reduction in maximum speed during bend running and a published model assuming maximum limb force as a constraint accurately predicts how much a sprinter must slow down on a bend given his maximum straight-line speed. In contrast, greyhounds do not slow down or change stride parameters dur...
Quantifying show jumping horse rider expertise using IMUs. Horse rider ability has long been measured using horse performance, competition results and visual observation. Scientific methods of measuring rider ability on the flat are emerging such as measuring position angles and harmony of the horse-rider system. To date no research has quantified rider ability in show jumping. Kinematic analysis and motion sensors have been used in sports other than show jumping to measure the quality of motor control patterns in humans. The aim of this study was to quantify rider ability in show jumping using body-mounted IMUs. Preliminary results indicate that ther...
True stress and Poisson’s ratio of tendons during loading. Excessive axial tension is very likely involved in the aetiology of tendon lesions, and the most appropriate indicator of tendon stress state is the true stress, the ratio of instantaneous load to instantaneous cross-sectional area (CSA). Difficulties to measure tendon CSA during tension often led to approximate true stress by assuming that CSA is constant during loading (i.e. by the engineering stress) or that tendon is incompressible, implying a Poisson's ratio of 0.5, although these hypotheses have never been tested. The objective of this study was to measure tendon CSA variation during qua...
Relationship between muscle forces, joint loading and utilization of elastic strain energy in equine locomotion. Storage and utilization of strain energy in the elastic tissues of the distal forelimb of the horse is thought to contribute to the excellent locomotory efficiency of the animal. However, the structures that facilitate elastic energy storage may also be exposed to dangerously high forces, especially at the fastest galloping speeds. In the present study, experimental gait data were combined with a musculoskeletal model of the distal forelimb of the horse to determine muscle and joint contact loading and muscle-tendon work during the stance phase of walking, trotting and galloping. The flexor te...
Effect of a collateral ligament sparing surgical approach on mechanical properties of equine proximal interphalangeal joint arthrodesis constructs. To (1) compare the effect of a collateral ligament sparing surgical approach with an open surgical approach on mechanical properties of proximal interphalangeal joint (PIPJ) arthrodesis, and (2) to determine the percentage of articular cartilage surface removed by transarticular (TA) drilling with different diameter drill bits. Methods: Randomized paired limb design. Methods: Cadaveric equine limbs (n=76). Methods: Cadaveric PIPJ were drilled using a 3.5, 4.5, or 5.5 mm drill bit at 80-84° to the dorsal plane to remove articular cartilage and subchondral bone from the distal articular surface...
Parameter study for the finite element modelling of long bones with computed-tomography-imaging-based stiffness distribution. Four radii of different horses were tested in three-point bending and in pure torsion. Detailed finite element (FE) models of these long bones were established by means of computed-tomography (CT) images and tests simulated for both load cases. For the allocation of the local isotropic material stiffness, individual exponential functions were applied whose factor and exponent were determined solely by fitting them to the measured torsional stiffness and bending stiffness of the entire bones. These stiffness functions referring directly to the CT number and having exponents between 1.5 and 2 we...
